D2 won't turn on after (failed) 2.41b upgrade - Page 2

doc0047 · 02-15-2010, 17:47

Mine just failed to turn on for 1.5 days, so I took it apart, blew it out with air, and disconnected and reconnected the battery cable. It works now!

FLHTHEMI · 02-16-2010, 10:23

Thought I bricked my D2+ the day I got it! Downloaded the FW update to 2.13 followed the directions to a Tee and ended up with a bricked unit. So I downloaded tcctools and installed their drivers. Placed the D2 in recovery mode (hold menu button and push power on at same time...looks like nothing happens but it does). Connected USB cable XP picked it up with tcctools drivers. Then I used tcctools -d cowond2 d2n_p.bin command line and viola! D2+ took the file then shut down. I powered it up and everything was working again! So I did the upgrade for FW 2.13 again and this time it completed correctly! Unit has been working fine since! Whew!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-15-2010, 17:47	#16
doc0047 Junior Member Join Date: May 2008 Posts: 9	Mine just failed to turn on for 1.5 days, so I took it apart, blew it out with air, and disconnected and reconnected the battery cable. It works now!

02-16-2010, 10:23	#17
FLHTHEMI Junior Member Join Date: Feb 2010 Posts: 5	Thought I bricked my D2+ the day I got it! Downloaded the FW update to 2.13 followed the directions to a Tee and ended up with a bricked unit. So I downloaded tcctools and installed their drivers. Placed the D2 in recovery mode (hold menu button and push power on at same time...looks like nothing happens but it does). Connected USB cable XP picked it up with tcctools drivers. Then I used tcctools -d cowond2 d2n_p.bin command line and viola! D2+ took the file then shut down. I powered it up and everything was working again! So I did the upgrade for FW 2.13 again and this time it completed correctly! Unit has been working fine since! Whew!