![]() |
![]() |
![]() |
![]() |
|
|
#1 |
|
Junior Member
Join Date: Mar 2007
Posts: 4
|
at first i want to say that i'm sorry with my english, because it is not so good.
the day before yesterday i get some trubble with my iaudio 6. i wanted to hear musik and than i got a shock. all ordners say "no file", only in the "system" ordner are files(by using usb conection). I don't know where the proplem is, but i know that there have to be 600music files and there are non. My iaudio 6 shows me that on the hdd , 600mb be free > 3,4 gb can't be free. If i transfer some files onto the iaudio 6, the hdd memory changes the free disk memory for example up to 900mb. I need fast assistance. I am grateful for each advice Yours sincerely oliver ![]() |
|
|
|
|
#2 |
|
Member
Join Date: Nov 2006
Location: Finland
Posts: 109
|
Try to reformat the HDD and if that doesn't work, reinstall the firmware. What firmware are you using by the way?
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Mar 2007
Posts: 4
|
thx for the fast answer.
i'm from germany and i hope you can understand me. as the mentioned proplem appeared, I downloaded and installed the firmware new.I think the old version was 1.25,too. after the install nothing changed. but i don't know weather i installed it in the right way. can you give me please one link where everything are explained.what do you mean with "reformat the HDD", can you explain it please? in hope Oliver edit: after reinstall the firmware the starting become much slower, i don't know why Last edited by Oliver j.; 03-13-2007 at 17:56.. Reason: edit |
|
|
|
|
#4 |
|
Junior Member
Join Date: Mar 2007
Posts: 4
|
ok now i have done some steps to repair it by my own, and i hope that the proplem is detached.
there were some software bugs which make my i audio cracy. wednesday i will test my i audio. now i hope that all will be on the right way. Yours sincerely oliver |
|
|
|
|
#5 |
|
Member
Join Date: Nov 2006
Location: Finland
Posts: 109
|
I've had similar problems when I installed the firmware unproperly. You must install it, then connect it to computer straight away and then format the hard drive (I guess it was FAT32) and then it should work properly.
|
|
|
|
|
#6 |
|
Junior Member
Join Date: Mar 2007
Posts: 4
|
ok i have done it. now i hope it would work better. i don't like software bugs, because they make work all time =(.
on this note i want to say thx to you. i hope that the proplem is remedied now. best wish oliver |
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|