PC doesn´t recognizing my D2 [Archive]

View Full Version : PC doesn´t recognizing my D2

kocour

07-12-2010, 15:09

Hi!

I have one BIG problem ... :( I was trying to instal Rockbox on my D2 (with SD card); everything passed without any problems. Then, i used "Rockbox First Bootloader-Patched Firmware" which can be found here: http://andrew92.centelia.net/?a=rockbox-first ... so i downloaded and instaled bootloader for my 3.13 firmware ... And from this moment my PC isn´t recognizing my Cowon D2 ... I cannot reinstal firmware because PC doesn´t see device.

Rockbox works fine. So, I tried turn ON my D2 with rockbox a then plug my D2 to PC. No respond, no device ... :(

shotofadds

07-12-2010, 15:42

There is no USB functionality in Rockbox. Either plug it into the PC when switched off (it should switch on automatically) or plug in to the PC while booted into the Cowon firmware.

If you cannot boot at all, use a pin in the reset button and try again. If you still can't boot, follow one of the tcctool "unbricking" guides.

kocour

07-12-2010, 16:01

I´m so stupid [laugh] of course, I can boot to cowon firmware by switch on/hold ... I didn´t try it before. Now, all problems are solved.

Nevertheless, Thank you Shotofadds [yes]